Catalogue export

HALF-ROUND GUTTER BRACKETS RAINWATER HOPPERS

GUTTER AND DOWNPIPE

GENERAL INFORMATION & RECOMMENDATIONS

GUTTER FRENEHARD square steel rainwater hoppers are made in France and come with a 10-year guarantee, featuring a sleek design that offers optimal water collection. Made with galvanised steel, powder-coated after manufacture, they guarantee a beautiful finish and perfect durability, even in aggressive areas. Designed for architectural, industrial and tertiary constructions and individual houses, the wide tint range (6 RAL as standard and other RAL tints upon request) enables harmonisation with the facade or bracings, or the creativity that you're looking for. Collecting rain water from flat roofs becomes an aesthetic accessories on any roof type. Out rainwater head is systematically equipped with a leaf-filter trap, so there'll be less need to unclog blocked downpipes.

DOWNPIPE CLAMPS

Its dimensions are standard but the cut-out for the rainwater outlet has already been created: You just need to mount the rainwater hopper onto the downpipe!

The rainwater hoppers are available in 3 sizes: - 200 x 200 mm (exits ø 80 and 100mm) - 250 x 250 mm (exits ø 80 and 100 mm) - 300 x 300 mm (exits ø 100 and 120 mm)

Assembling the leaf-filter trap: Place the flat side of the trap underneath the spout (or the return) (* 1) Press down and slide the trap to position it correctly (* 2)  

Dismantling the leaf-filter trap: Press down and slide the trap (* 3) Lift up the trap to remove the rainwater hopper (* 4)  

(* 1)

(* 4)

(* 3)

(* 2)

PRODUCT DESHAFTS

Spot-welding, on the rear, is invisible once installed. Pre-pierced holes allow for a quicker installation process.

Leaf-filter trap above the rainwater head.

The round outlet is made with galvanised steel, like the rest of the rainwater hopper.

The round outlet is spot-welded for a perfect seal.

Standard EN 1462 Resistance to corrosion: A (HDG Steel) / B (Pre-galvanised Steel) Resistance to the load: H (Heavy hook) / L (Light hook) / O (Hook with opening width <80 mm)

26