Catalogue export

SECUR+ ® ROOF ANCHORS

SAFETY

HOOKS

AND CLAMPS DOWNPIPES

GENERAL INFORMATION AND RECOMMENDATIONS

(SLATE, TAVAILLON, TILE, ETC.) ) SMALL ROOFING ELEMENTS, CHOOSING THE RIGHT ANCHOR

Depending on the type and roofing support, roof anchors for PPE and SECUR+ ® safety hooks can be straight, curved (25 or 50 mm) or twisted. The attachments provided are designed to adapt to various structures and to meet the applicable standards. The use of any other attachment is strictly prohibited!

ACCESSORIES FOR PPE

HOOKS

CLOUT NAILS AND NAILS

ROOFING MATERIALS Zinc and fine slate

FRAME SUPPORT

WITH ROOF UNDERLAY

Annealed clout nails Ø 5 x 70 mm

WITHOUT ROOF UNDERLAY

Batten

Flat + 5 annealed clout nails

Twisted + 100 mm clamp axis Curved by 25 mm + pair of connectors Curve of 25 mm + 5 annealed clout nails Twisted + 100 mm clamp axis Twisted + 100 mm clamp axis Curved by 50 mm + 1 pair of connectors Curve of 50 mm + 5 annealed clout nails Twisted + 100 mm clamp axis

Curved by 25 mm + 1 pair of connectors Curve of 25 mm + 5 annealed clout nails Curved by 50 mm + 1 pair of connectors Curve of 50 mm + 5 annealed clout nails

Clamp axis

Truss

SNOWSTOPS

Slate and flat tile

Rafter

Connector on truss

Truss

ROOF

LADDERS

Tile

Rafter

Rafter

Curve of 50 mm + offset part

PROPERLY IMPLANTING YOUR ANCHOR POINTS

CLADDING

At the edge 1.5 m minimum

At the ridge 1 m maximum

ROOF

ANCHORS

At the eaves 0.5 m minimum

2,0 m maxi

PERSONAL PRO TECTION

There are no regulatory texts imposing any particular implantation for anchors. Nevertheless, to ensure perfect safety, FRÉNÉHARD recommends that you install an anchor every 2 metres at most (in order to be able to easily pass from one anchor to another using a double lanyard), and at 1 metre at most from a particular point (roof-ridge, slide, chimney, solar panel, roof window, etc.).

COLLECTIVE

PROTECTION

55

DTU - QUOTE

STANDARDS /