Catalogue export

PERMANENT LIFELINES

SAFETY

LIFELINES

NEW Standard EN 795 Type C v2016 Standard TS 16415 Type C v2013

 Certified to host 2 people at once .  Can be installed quickly and easily by 2 people. Its installation does not require a lot of equipment.

 The maximum interval distance between poles is 20 m . It ensures significant savings for the installer in terms of installation time and materials. Intermediate poles (straight or angled) are crossed automatically using a specific trolley. This systems gives the user greater freedom of movement and allows them to save time as they'll never need to detach themselves from the lifeline to move onto intermediate crossings.  The range covers installations on frames (wooden or metal), on concrete slabs , on parapets , on dry profiles or into wall anchors . It is the installer's responsibility to check with a specialist design office to ensure that the building structure will be capable of supporting the efforts generated by the system.  A lifeline must be visually inspected before each use and must mandatorily be inspected by a competent organisation once per year. If a lifeline is solicited, it must be imperatively condemned and replaced in full.  It's certified in compliance with standards: 1 person: NF EN 795: 2016 type C (mobile anchor on flexible support) and 2 people: TS 16415: 2013 type C (simultaneous use by more than one person).

5 POLE MODELS TO ADAPT TO ANY TYPE OF ROOFING FLAT-BASE POLE Energy absorption system allowing for a reduction in the efforts sustained by the patented structure

Receiving structure:   Concrete  Wood   Metal  Dry profile (BAS)  Sandwich panel (BAPS) Attachment:   Clamping   Rail clipping   Chemical anchor   Plywood  Self-tapping screws  Spring plugs

Désignation: Potelet d'extrémité Poids: 7.3Kg

POLE WITH SIDE BASE

Receiving structure:   Concrete  Wood   Metal  Dry profile (BAS)  Sandwich panel (BAPS) Attachment:   Clamping   Rail clipping   Chemical anchor   Plywood  Self-tapping screws  Spring plugs

Poids 12.79Kg

PARAPET POLE

Receiving structure:   Concrete  Wood   Metal  Dry profile (BAS)  Sandwich panel (BAPS) Attachment:   Clamping   Rail clipping   Chemical anchor   Plywood  Self-tapping screws  Spring plugs

SUPPORT ON FACADE

Receiving structure:   Concrete  Wood   Metal  Dry profile (BAS)  Sandwich panel (BAPS) Attachment:   Clamping   Rail clipping   Chemical anchor   Plywood  Self-tapping screws  Spring plugs

SUPPORT FOR DRY PROFILE

Receiving structure:   Concrete  Wood   Metal  Dry profile (BAS)  Sandwich panel (BAPS) Attachment:   Clamping   Rail clipping   Chemical anchor   Plywood  Self-tapping screws  Spring plugs

70