Catalogue export
GUTTER BRACKETS
GUTTER AND DOWNPIPE
GUTTER
GENERAL INFORMATION & RECOMMENDATIONS
BRACKETS DOWNPIPES
1/2 round brackets
Square brackets
Moulded brackets
Nantaise brackets
Havraise bracket
Half-round gutter: Developed width 16, 25, 33, 40, 65.
Square gutter: • Interior width 112 cm Square profile • Interior width 152 cm Rectangular profile Installation on rafter / batten Fascia installation
Moulded gutter: Developed width 33, 40.
V-shape square bracket Lift 8, 10.
Havraise / Ardennaise gutter Developed width 33, 40.
ACCESSORIES FOR PPE HOOKS
Installation on rafter / batten Fascia installation Pricking/sealing installation Direct installation on roofing Entablature installation
Installation on rafter / batten Fascia installation
Installation on rafter / batten
Installation on rafter / batten
FASCIA INSTALLATION
INSTALLATION ON RAFTER / BATTEN Slope adjusted to the water drop or aligned with the last nail end hole.
Slope adjusted to the water drop or plotted installation.
PINS AND NAILS
Max. distance: 50 cm
Max. distance = 50 cm
Interior edge of the gutter at 1 cm above the bead level.
YES
Minimum space between the bracket and the end of the rafter = 2 cm.
NO*
Interior edge of the gutter at 1 cm above the bead level.
* Unless in cases of installation on accessories such as poles, fixings, etc.
SNOWSTOPS
DIRECT INSTALLATION ON ROOFING
INSTALLATION ON ENTABLATURE
The brackets must be systematically attached to the upper waves.
ROOF
LADDERS CLADDING
37
Slope adjusted to the water drop.
36
35
Max. distance = 50 cm
34
Interior edge of the gutter at 1 cm above the bead level.
Max. distance = 40 cm
PRICKING, SEALING INSTALLATION Pricking, There are three main bracket families which can be distinguished by the type of installation and length of slope.
ROOF
ANCHOR POINTS
Type A and B
Type C and D
Type E and F
The slope of the gutter must be plotted, with the bracket shafts being straight.
The gutter slope is formed by the gutter brackets in 8 progressive lifts (20, 25, 30, 35, 40, 45, 50, 55), enabling a maximum slope of 4 ml, the brackets being installed horizontally.
The gutter slope is formed by the gutter brackets in 15 progressive lifts (20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90), enabling a maximum slope of 7.5 ml, the brackets being installed horizontally.
PERSONAL PRO TECTION
COLLECTIVE
PROTECTION
Standard EN 1462 Resistance to corrosion: A (HDG Steel) / B (Pre-galvanised Steel) Resistance to the load: H (Heavy hook) / L (Light hook) / O (Hook with opening width <80 mm)
5
5
DTU - QUOTE
STANDARDS /
Made with FlippingBook - Online magazine maker